My Finch doesn't drive straight. Is there a way to calibrate the Finch?

There is a way to fix that! Use the steps below and follow along with our video.

1. Load the attached hex file onto a V2 micro:bit 
2. Plug it into your Finch and then turn on your Finch
3. You'll see the micro:bit screen display 'P', the rows will fill up, and then you'll see a check mark. After that Finch turns off.
4. Now either replace the micro:bit or change the code on the micro:bit to a different program to test it.

If the above doesn't work or you have a V1 micro:bit, please reach out to us at support@birdbraintechnologies.com for additional assistance!